InLine D-Sub 15 terminal block, socket, screw terminal, for top-hat rail

• Time savings during installation: Quick wiring via screw terminals for 16–24 AWG – tool-assisted with flat-head screwdriver ≤ 2.5 mm.
• Stable connection thanks to screw lock: The 2-row D-Sub-15 female connector is equipped with a mounting thread (UNC #4-40) and enables secure mechanical fixation with matching plugs.
• Versatile use in industry: Ideal for serial control lines in control cabinets, test benches, control systems, or building automation.
• DIN rail mounting for structured installations: The robust DIN rail housing allows direct mounting on mounting rails – standard-compliant, secure, and space-saving.
• High signal quality: An insulation resistance ≥ 10 MΩ at 300 V DC and a rated current of 1.0 A per pin ensure reliable signal transmission – even under continuous load.

The InLine® D-Sub 15 terminal block with female connector in a 2-row design is specially designed for structured installations in control cabinets. The side-accessible screw terminals with pressure plate enable the connection of single wires in the range of 16–24 AWG. Tool-assisted wiring is carried out with a flat-head screwdriver ≤ 2.5 mm.

The socket has an integrated screw lock (UNC #4-40) for secure connection with matching connectors. The pre-assembled DIN rail clip allows direct mounting on industry-standard top-hat rails. The EVA insulating layer on the underside provides additional protection when mounting on conductive surfaces.

• D-Sub 15 socket: 2-row, with mounting thread for plug locking (UNC #4-40)
• Connection technology: Screw terminal with pressure plate
• Connection range: 16–24 AWG
• Actuation: With flat-blade screwdriver ≤ 2.5 mm
• Rated current: 1 A per pin
• Max. operating voltage: 100 V between two signals
• Insulation resistance: ≥ 10 MΩ @ 300 V DC
• Operating temperature: –10 °C to +70 °C
• Insulation layer: EVA insulation on underside
• Mounting: Housing for direct mounting on DIN rail
• Dimensions: approx. 87 × 53 × 34.8 mm (L × W × H)