InLine IDC 10 socket to terminal block, 5-pin, on circuit board

• Time savings during installation: The 5-pin screw terminal block with pressure plate allows for quick, tool-assisted wiring – for wires in the 16–26 AWG range.
• Standardized IDC interface with clear pin assignment: The 10-pin socket (2×5) ensures clean signal separation – ideal for structured wiring in test, control, and laboratory applications.
• Space-saving PCB solution with logical arrangement: Compact design on a stable PCB for direct integration into housings, adapter panels, or test environments.
• Flexible use in industry: Suitable for commissioning, embedded projects, signal distribution, or control lines in digital systems.
• High signal quality: Tested insulation resistance up to 300 V AC, rated current 1 A per pin, and 100% short-circuit testing for long-term operational safety.

The InLine® IDC-10-to-terminal block adapter with 5-pin screw terminal strip offers a compact solution for connecting digital signals, power lines, or control connections—without soldering. The combination of IDC socket (2×5) and side-accessible terminal strip is mounted on a robust printed circuit board and optimized for industrial environments.

The screw terminals (5.0 mm pitch) are clearly labeled and support stranded wires in the range of 16–26 AWG. Tool-assisted wiring is performed using a flat-blade screwdriver ≤ 2.5 mm. An EVA insulating layer provides protection during installation on conductive surfaces. With 100% short-circuit testing and high insulation values, the adapter is ideal for test systems, control devices, or embedded applications.

• IDC interface: 10-pin IDC socket (2×5), pitch 2.54 mm
• Screw terminal block: 5 terminals, pitch 5.0 mm, with pressure plate
• Signal assignment: GND (ground), D0 to D3 (digital signal lines, assignable depending on application)
• Connection range: 16–26 AWG
• Actuation: With flat-blade screwdriver ≤ 2.5 mm
• Rated current: 1.0 A per pin
• Max. operating voltage: 100 V between two signals
• Insulation resistance: ≥ 10 MΩ @ 300 V DC
• Max. conductor resistance: 5 ohms
• Operating temperature: –10 °C to +70 °C
• Insulation layer: EVA insulation on underside
• Dimensions: approx. 50 × 21.2 × 18.4 mm (L × W × H)